loading

CustomLong SleeveT-ShirtManufacturer

Sleeve and cuff details, made to order.

UNIT-100 is a factory in Zhongshan that cuts and sews long-sleeve T-shirts for clothing brands. The sleeve of a long-sleeve tee runs to the wrist and ends in a rib cuff or a plain hem. A custom order starts at 100 pieces per style and per color.

Our catalog has 3 long-sleeve tees, all with a crew neck: the round neckline some suppliers list as an O-neck. You choose the fabric, the fit, the cuff and where the prints go. For quick-dry training tees with full sleeves, see gym T-shirts. Need fewer than 100? Our stock unisex long-sleeve tee, WG0017, is 240 GSM cotton in sizes S to 3XL, from 50 pieces with colors and sizes mixed.

Sewing line at the UNIT-100 factory in Zhongshan
Minimum
100 pieces per style and color, sizes mixed
Sample
3–7 days plain, about 10 with a print
Bulk
7–20 working days after sample approval
Blank price at 100 pieces
$8.60–$10.70 a piece, 235 GSM cotton

That is our long-sleeve tee as a blank, in 235 GSM combed cotton jersey; the short-sleeve tee in the same fabric is $6.70–$8.80. Prices are from our T-shirt tech pack page on October 31, 2026 and can move with the exchange rate. Our shipping quotes include duties and taxes. A sample tee with a one-color print costs about $60.

Long sleeve T-shirt from our catalog

An oversized long-sleeve tee with a dropped shoulder and hemmed sleeves. It is made as shown or with your changes, such as rib cuffs: send us its code. Our other two long-sleeve tees carry other names in their artwork, so they are not shown.

Which measurements does a long-sleeve tee need?

A long-sleeve tee needs the body measurements of a short-sleeve tee, plus a full sleeve length and the cuff. The size charts on our T-shirt tech pack page are for short sleeves, so a long sleeve starts from your numbers or from a tee you send us. In our tech pack builder, a long-sleeve tee lists the points to measure and leaves the values for you: your size M, and how much each point grows per size.

Body and neckHalf chest, body length, shoulder, armhole and neck, from our regular or oversized size chart, or from your own tee.
Sleeve lengthFrom the shoulder point along the outside of the sleeve to the end of the cuff, measured flat.
Dropped shoulderOn an oversized tee the shoulder point sits further down the arm, so the sleeve is shorter for the same reach to the wrist. Our oversized chart is 56 cm across the shoulders in size M, against 47 cm on the regular fit.
BicepHalf the sleeve width, 2.5 cm below the underarm.
CuffA rib cuff: its height, and its opening laid flat without stretching. A hemmed sleeve: the width of the sleeve end.

Cut, sewn and printed in Zhongshan

We cut, sew and pack in our own factory in Shaxi Town, Zhongshan, and print in our own print shop in Henglan Town, Zhongshan: 70+ people work in the garment factory and 40+ in the print shop. Washing, garment dyeing, embroidery and sublimation printing are done at partner factories, and so is part of the sewing when our own lines are full.

Our sample room has two pattern makers. From a photo or a garment, a pattern takes about 3 days, and our pattern makers grade the sizes too. Before every bulk run we make a pre-production sample, and our QC team checks before production starts, during it and at the end.

UNIT-100 has made clothes since 2001, when our owner's father founded the company. We make about 2 million garments a year; a typical order is 300 to 400 pieces, and about 38% of our customers order again. The factory figures on this page come from Kenneth, our owner, who is the second generation of the family and has worked in the business for 8 years. Meet him, Yunus, quality director at our factory, and Eric, our design director, on our About page.

Printed T-shirts entering the tunnel dryer in the UNIT-100 print shop

How an order works

Over the past year, 90% of our orders shipped within 2–3 days of the date we promised, early or late.

  1. Send a photo or a tech pack

    We reply within 24 hours with a price and the questions we need answered.

  2. Sample

    About 3–7 days plain, about 10 with one print or embroidery, 12–13 with both, and 14–18 days or more with a wash.

  3. Approve and pay the deposit

    You check the fit, weight and print on the sample, then pay a 30–50% deposit to start bulk.

  4. Bulk

    7–20 working days after you approve the sample. Every batch gets an AQL 2.5 inspection, a random sample checked against the agreed tolerances; pieces outside them are reworked, remade or compensated.

  5. Ship

    Before you pay the balance, we send photos or a video of your goods. To the US it takes about 7 days by air, at about $10 a kilo, or about 20 days by sea.

You can pay by bank transfer or PayPal, or order through Alibaba or Made-in-China. You are welcome to send your own inspector. Sizes can be mixed inside each 100. Fabric is cut in whole rolls, so for some fabrics the quote may suggest a larger run per color to use a full roll. Fewer than 100 pieces? Our stock blanks start at 50 per style, with colors and sizes mixed.

FAQ

Should a long-sleeve tee have rib cuffs or a hemmed sleeve?

A long-sleeve tee can have either: rib cuffs hold the sleeve at the wrist, and a hemmed sleeve hangs loose and open. A rib cuff is a separate band of rib knit sewn onto the sleeve end, so it stretches over the hand and springs back. A hemmed sleeve is folded up and cover-stitched, like the sleeve of a short-sleeve tee. ZH-0502 has hemmed sleeves.

Rib cuffs stay put when the sleeve is pushed up the arm. Write the cuff into your tech pack notes with a reference photo, and give the rib its own Pantone code if it should not match the body.

Where can a print go on a long-sleeve tee?

A print on a long-sleeve tee can go on the chest, the back, down either sleeve or near the wrist, and each position is priced on its own. We print by screen print, DTG or DTF in our own print shop in Zhongshan. DTF does not suit tees that go in a hot tumble dryer.

A print down the sleeve is a long, narrow strip. Give us its width, its length and how far below the shoulder seam it starts. Keep it above the cuff: the rib stretches over the hand, and a print across it can crack. On full custom a print can be any size, and a bigger print costs more. Embroidery, on a sleeve or anywhere else, is done at a partner factory.

Can you make a 200 GSM long-sleeve tee?

We can make a 200 GSM long-sleeve tee: our tech pack builder prices the long sleeve in our T-shirt fabrics from 160 to 300 GSM, and we quote a lighter or heavier fabric by hand. The long-sleeve tees in our catalog run from 150 to 330 GSM. The builder shows a starting long-sleeve price for each weight band; the price on this page is for 235 GSM. For what GSM means and how a heavy tee wears, see heavyweight T-shirts.

How do you measure the full sleeve length?

Measure from the shoulder point along the outside of the sleeve to the end of the cuff, with the garment laid flat. If you use a dropped shoulder, specify the shoulder width too: the sleeve can be shorter while still reaching the wrist.

Can I choose an oversized long-sleeve fit?

Yes. Set the body and shoulder measurements for the shape you want, then give us the full sleeve length and cuff opening. We can start from our regular or oversized T-shirt chart or from a long-sleeve tee you send us.

Is there a stock long-sleeve option for a smaller order?

Yes. Our stock unisex long-sleeve tee WG0017 is 240 GSM cotton in sizes S to 3XL, starting at 50 pieces with colors and sizes mixed. A custom cut-and-sew order starts at 100 pieces per style and color.

LONG SLEEVE / MADE TO ORDER

Get every sleeve detail right.

Send the sleeve length, cuff finish, fabric and fit. We will prepare a sample for your review.

Create your long sleeve

Send us your design

Send a photo, a sketch or a tech pack. We reply within 24 hours.

Contacts
Kenneth
Tel/WhatsApp
+852 98764729
E-mail
sales@unithundred.com
Find Us in Guangzhou 

Rooms 511–512, Block A, Wantong International Square, 135 Huanshi West Road, Liwan District, Guangzhou, China

Contact Us

Contacts: Kenneth

Tel/WhatsApp: +852 98764729

E-mail: sales@unithundred.com

Founded in 2001, UNIT-100 is a cut-and-sew garment factory in Zhongshan, with its office in Guangzhou, making T-shirts, hoodies, sweatshirts and pants for clothing brands.

Customer service
detect