loading

Custom T-Shirt Manufacturer in China

UNIT-100 has made custom T-shirts for clothing brands since 2001, and we cut and sew them in Zhongshan. Most of our T-shirt fabrics run from 180 to 400 GSM. A custom order starts at 100 pieces per style and per color.

Need fewer pieces, or need them sooner? Our stock tees run 180–310 GSM and start at 50 pieces per style, with colors and sizes mixed. This page puts the two routes side by side and lists all 25 of our T-shirt pages.

Minimum
100 pieces per style and color, sizes mixed
Sample
3–7 days plain, about 10 with a print
Bulk
7–20 working days after sample approval
Price at 100 pieces
$6.70–$8.80 a piece, 235 GSM cotton, before print

Those are blank prices: a print, embroidery or wash is quoted on top, by its size and colors. A sample tee with a one-color print costs about $60, and 100 tees fly to the US for about $400. Prices are from our T-shirt tech pack page on October 31, 2026 and can move with the exchange rate.

T-shirts by print, fabric, style and use

Our 25 T-shirt pages sit in four groups: printing and finishing, material, style, and application. Each page answers the questions for one kind of tee. GSM and fabric weight are covered on the heavyweight T-shirt page.

Style

  • Heavyweight T-shirtsWhat GSM means, what counts as heavyweight, and how heavy tees shrink and print.
  • Regular fit T-shirtsOur standard body shape and size chart, the base the other fits are measured against.
  • Slim fit T-shirtsA close fit, stretch in the fabric, and how tight the tolerances should be.
  • Crew neck T-shirtsThe neckline only: rib width, neck width and keeping the collar from stretching.
  • V-neck T-shirtsHow deep the V goes, how the rib is joined, and keeping the V flat.
  • Long sleeve teesSleeve length, cuff rib and where a sleeve print can go.
  • Raglan T-shirtsThe raglan seam, contrast sleeves, and prints that should not cross a seam.
  • Henley T-shirtsHow many buttons, which buttons, and how the placket is made.
  • Tank topsArmhole depth, strap width, and binding or rib at the edges.

Printing & Finishing

  • Custom printed T-shirtsScreen print, DTG or DTF: which method suits your artwork, and how big a print can be.
  • Acid wash T-shirtsWhat an acid wash does to a tee, which fabrics take it, and how much each piece varies.
  • Embroidery T-shirtsFlat, appliqué or 3D puff stitching, and when to embroider instead of print.
  • Tie dye T-shirtsTie-dye patterns, how the colors hold up in the wash, and how long tie-dye takes.
  • Camo T-shirtsHow camo gets onto a tee, and if you can set your own camo colors.

Material

Application

  • Gym T-shirtsWhat to look for in a gym tee: fabric, stretch, seams, sweat marks and print life.
  • Promotional T-shirtsEvent and company tees from stock blanks with your logo, and their plain prices at 50 and 100 pieces.

Stock blanks or full custom: which route fits your T-shirts?

Stock blanks fit when one of our ready-made tees already has the fabric and fit you want, and you add your logo. Full custom fits when you need your own fabric, fit, measurements or label.

Stock blanks start at 50 pieces per style, with colors and sizes mixed. Full custom starts at 100 pieces per style and per color, with sizes mixed inside each color.

Stock blanks

Minimum
50 pieces per style, colors and sizes mixed.
Fabric weight
Tees in 180–310 GSM.
Colors
Black, white and gray are always in stock. Rarer colors can run short, and restocking takes about 1 week to 10 days.
Time
Plain blanks ship about 7 days after the deposit, 2–3 days more from 500 pieces of a style.
Your logo
Print adds 5–6 days, embroidery 7–10.
Logo size
Screen print, DTG and DTF up to about 46 × 46 cm. Embroidery up to 12 cm wide.
Fit and label
Our stock fits, tees in XS to 4XL. Your own label can replace the tear-away neck label.

See our stock blanks

Full custom

Minimum
100 pieces per style and per color, sizes mixed.
Fabric weight
T-shirt fabrics in 180–400 GSM.
Colors
About 50–100 per fabric. A Pantone code is matched to the closest color we hold.
Time
Sample in about 3–7 days plain, about 10 with one print or embroidery, 14–18 days or more with a wash. Bulk 7–20 working days after sample approval.
Your logo
Screen print, DTG and DTF in our print shop (DTF does not suit a hot tumble dryer). Embroidery and washes at partner factories.
Logo size
Any size. A bigger print costs more.
Fit and label
Any fit, from our size charts or your own measurements. Your own neck and care labels, 500 of each.

Size charts and prices for full custom

Cut, sewn and printed in Zhongshan

We cut, sew and pack in our own factory in Shaxi Town, Zhongshan, and print in our own print shop in Henglan Town, Zhongshan: 70+ people work in the garment factory and 40+ in the print shop. Washing, garment dyeing, embroidery and sublimation printing are done at partner factories, and so is part of the sewing when our own lines are full.

Our sample room has two pattern makers. From a photo or a garment, a pattern takes about 3 days, and our pattern makers grade the sizes too. Before every bulk run we make a pre-production sample, and our QC team checks before production starts, during it and at the end.

UNIT-100 has made clothes since 2001, when our owner's father founded the company. We make about 2 million garments a year; a typical order is 300 to 400 pieces, and about 38% of our customers order again. The factory figures on this page come from Kenneth, our owner, who is the second generation of the family and has worked in the business for 8 years. Meet him, Yunus, quality director at our factory, and Eric, our design director, on our About page.

Sewing line at the UNIT-100 factory in Zhongshan
Our sewing line in Zhongshan.
A worker at the computer of the automatic fabric cutter in the UNIT-100 cutting room
Cutting room: patterns are cut by an automatic cutter.
Screen-print line in the UNIT-100 print shop in Henglan Town, Zhongshan
Screen-print line in our own print shop.

What does a first order with us look like?

We take a first order one style at a time, even when it has many. One new US brand came to us with ten styles in its first order. The hard part was coordination: the fabrics were hard to buy and easy to mix up.

So we went style by style. Pattern done, fabric bought, then a merchandiser took each style to the factory in person and set it up. There were a few small mistakes along the way: a fabric came in short, and we replaced it. The order shipped right.

How many T-shirts should a new brand order first?

Start small. Kenneth, our owner, tells new brands not to give us a big order at the start: test us first on quality, timing and fit, and test your own market. A brand that is now among our largest customers began with 100 pieces of one tee. They now order about 1,000 of each style, roughly a fifth of everything we sell.

The costliest mistake we see is not in the sewing. A brand in New York ordered 1,000 pieces in 8 styles, each embroidered and printed, and the designs were good. They had no plan for selling on Instagram, and most of the stock sat unsold. Know who you sell to, and how you will reach them, before you order big.

How an order works

Over the past year, 90% of our orders shipped within 2–3 days of the date we promised, early or late.

  1. Send a photo or a tech pack

    We reply within 24 hours with a price and the questions we need answered.

  2. Sample

    About 3–7 days plain, about 10 with one print or embroidery, 12–13 with both, and 14–18 days or more with a wash.

  3. Approve and pay the deposit

    You check the fit, weight and print on the sample, then pay a 30–50% deposit to start bulk.

  4. Bulk

    7–20 working days after you approve the sample. Every batch gets an AQL 2.5 inspection, a random sample checked against the agreed tolerances; pieces outside them are reworked, remade or compensated.

  5. Ship

    Before you pay the balance, we send photos or a video of your goods. To the US it takes about 7 days by air, about $400 for 100 tees, or about 20 days by sea.

You can pay by bank transfer or PayPal, or order through Alibaba or Made-in-China. You are welcome to send your own inspector. Sizes can be mixed inside each 100. Fabric is cut in whole rolls, so for some fabrics the quote may suggest a larger run per color to use a full roll. Fewer than 100 pieces? Our stock blanks start at 50 per style, with colors and sizes mixed.

FAQ

How much time do custom labels and packaging add?

Custom neck and care labels add about 8 to 10 days to a custom order, because they have to be ready before sewing starts. Hang tags, stickers and tissue paper start at 500 pieces and take about 10 days. A custom-printed poly bag starts at 5,000 pieces and takes about 10 to 15 days. Boxes and card inserts add no time, since they do not hold up the sewing.

How much does a custom T-shirt cost per piece?

A custom T-shirt in our standard 235 GSM cotton costs $6.70–$8.80 a piece at 100 pieces, before printing. By fabric weight, a tee at 100 pieces costs, before printing:

  • 200–239 GSM: $6.00–$10.10
  • 240–269 GSM: $5.90–$10.80
  • 270–300 GSM: $5.90–$11.70

Each weight range covers several fabric types, so a heavier range can start lower. A print is quoted on top of the blank, by its size and number of colors.

Do your T-shirt prices include shipping and duties?

Our T-shirt prices do not include shipping. We quote shipping on its own, and our shipping quotes include duties and taxes. To the US, shipping takes about 7 days by air or about 20 days by sea. Tell us your destination country when you ask for a quote.

Can my T-shirts carry my own brand label?

Yes. We make your own neck labels and care labels, with a minimum of 500 of each. Making them adds about 8 to 10 days, because they must be ready before sewing starts. On a stock tee, your label replaces the tear-away neck label. It is sewn on below the back neck tape, not into the neck seam.

Can one T-shirt style come in several colors?

Yes, and each color needs its own 100 pieces, with sizes mixed inside it.

Each fabric comes in about 50 to 100 colors. Send a Pantone TCX code and we match it to the closest color we already hold in that fabric. Two or more colors of one style can come in at a lower price a piece: our sales team quotes it.

Request a T-Shirt Quote

Send a reference or tech pack, fabric composition and GSM, quantity per style, size breakdown, artwork and delivery destination. If a detail is undecided, tell us what you need the garment to achieve.

START A CONVERSATION

Request a T-Shirt Quote

Send a reference or tech pack, fabric composition and GSM, quantity per style, size breakdown, artwork and delivery destination. If a detail is undecided, tell us what you need the garment to achieve.

Contacts
Kenneth
Tel/WhatsApp
+852 98764729
E-mail
sales@unithundred.com
Find Us in Guangzhou 

Rooms 511–512, Block A, Wantong International Square, 135 Huanshi West Road, Liwan District, Guangzhou, China

Contact Us

Contacts: Kenneth

Tel/WhatsApp: +852 98764729

E-mail: sales@unithundred.com

Founded in 2001, UNIT-100 is a cut-and-sew garment factory in Zhongshan, with its office in Guangzhou, making T-shirts, hoodies, sweatshirts and pants for clothing brands.

Customer service
detect