
The neckline detail changes everything.
UNIT-100 is a factory in Zhongshan that cuts and sews V-neck T-shirts for clothing brands. On a V-neck the neckline comes to a point at the front, and the rib or binding has to meet cleanly there. A custom order starts at 100 pieces per style and per color.
You set how deep the V drops and how its point is finished. The fabric can be our standard 235 GSM combed cotton jersey or another of our T-shirt fabrics, and the body any of our fits. We do not stock blank V-necks, so every V-neck is made to order.

V-necks are not priced on our T-shirt tech pack page, so we quote each one by its fabric and finish. Send us the fabric and V depth you want, or a V-neck tee you like. Our shipping quotes include duties and taxes. A sample tee with a one-color print costs about $60.
The point of a V-neck is finished in one of three common ways: a crossed rib, a mitered rib or a binding. Each looks different up close, so send us a photo of the point you want, or a tee that has it. You see the point on your sample and approve it before bulk.
| Crossed rib | One end of the rib laps over the other at the point and is stitched down. The overlap shows as a small step at the tip. |
|---|---|
| Mitered rib | The rib is seamed at an angle at the point, so the two sides meet in a straight line, like the corner of a picture frame. |
| Binding | A narrow strip of fabric wraps the cut edge and folds at the tip. It gives a thinner, flatter edge than a rib. |
| What to send | A close photo of the point, the V depth in cm for size M, and the width of the rib or binding. |
We cut, sew and pack in our own factory in Shaxi Town, Zhongshan, and print in our own print shop in Henglan Town, Zhongshan: 70+ people work in the garment factory and 40+ in the print shop. Washing, garment dyeing, embroidery and sublimation printing are done at partner factories, and so is part of the sewing when our own lines are full.

Our sample room has two pattern makers. From a photo or a garment, a pattern takes about 3 days, and our pattern makers grade the sizes too. Before every bulk run we make a pre-production sample, and our QC team checks before production starts, during it and at the end.
UNIT-100 has made clothes since 2001, when our owner's father founded the company. We make about 2 million garments a year; a typical order is 300 to 400 pieces, and about 38% of our customers order again. The factory figures on this page come from Kenneth, our owner, who is the second generation of the family and has worked in the business for 8 years. Meet him, Yunus, quality director at our factory, and Eric, our design director, on our About page.
Over the past year, 90% of our orders shipped within 2–3 days of the date we promised, early or late.
We reply within 24 hours with a price and the questions we need answered.
About 3–7 days plain, about 10 with one print or embroidery, 12–13 with both, and 14–18 days or more with a wash.
You check the fit, weight and print on the sample, then pay a 30–50% deposit to start bulk.
7–20 working days after you approve the sample. Every batch gets an AQL 2.5 inspection, a random sample checked against the agreed tolerances; pieces outside them are reworked, remade or compensated.
Before you pay the balance, we send photos or a video of your goods. To the US it takes about 7 days by air, about $400 for 100 tees, or about 20 days by sea.
You can pay by bank transfer or PayPal, or order through Alibaba or Made-in-China. You are welcome to send your own inspector. Sizes can be mixed inside each 100. Fabric is cut in whole rolls, so for some fabrics the quote may suggest a larger run per color to use a full roll.
Choose a crew neck for a classic tee with a chest print close to the neck, and a V-neck for a tee that opens at the chest. Under an open shirt or jacket, a V-neck stays hidden where a crew neck shows.
The V cuts into the chest, so a print has to start below its point. Print positions are measured from a fixed point; on a V-neck, use the high point shoulder, because the front neck seam runs down into the V. Neck width and rib height are set the same way on both necks: see crew neck T-shirts.
No V-neck depth is standard: the V should be as deep as your design needs, written in centimeters in your tech pack rather than as "shallow" or "deep". The depth is the front neck drop. Lay the tee flat and measure from the line between the two neck-shoulder points (HPS) straight down to the tip of the V.
To choose a number, measure a V-neck you like in size M and send it to us with the size, or send the tee itself as the sample. We grade the depth across your other sizes, or follow your own size chart.
The point of a V-neck puckers when the rib is sewn on tighter along one side of the V than the other. It also puckers when the two ends of the rib are caught at different depths at the tip. The V then twists to one side, or its tip bunches up or gapes.
Check the point on your sample before you approve bulk. Lay the tee flat and see that the tip sits on the center front and lies flat, then wash it the way your customers will and look again. In bulk, the V depth is checked against the tolerance agreed in your tech pack.
Yes. Set the V depth in centimeters for your reference size and specify the rib or binding width. A close photograph or a sample tee helps us match the shape and point before you approve bulk production.
The point can use a crossed rib, a mitered rib or a narrow binding. They create different edges at the tip, so send a close photo of the finish you prefer and check that detail on the sample.
No. Our V-necks are made to order, with a custom order starting at 100 pieces per style and color. You choose the body fit, fabric, V depth and point finish.
V-NECK / MADE TO ORDER
Tell us the V depth, rib width, fabric and fit. We will develop a sample around your design.
Create your V-neckRooms 511–512, Block A, Wantong International Square, 135 Huanshi West Road, Liwan District, Guangzhou, China
Quick Links
Services
Founded in 2001, UNIT-100 is a cut-and-sew garment factory in Zhongshan, with its office in Guangzhou, making T-shirts, hoodies, sweatshirts and pants for clothing brands.